cs35l01和cs35l03主要特性：
filterless hybrid class-d architecture
– <1 ma quiescent current
– 1 x 2.9 w into 4 ohm(10% thd+n)
– 1 x 2.3 w into 4 ohm (1% thd+n)
– 1 x 1.7 w into 8 ohm (10% thd+n)
– 1 x 1.4 w into 8 ohm (1% thd+n)
advanced delta-sigma closed-loop modulation
– 98 db signal-to-noise ratio (a-weighted)
– 0.02% thd+n @ 1 w (sd & hd mode)
integrated protection and automatic recovery for output short-circuit and thermal overload
pin-compatible 9-ball wlcsp family for easy upgrade path
– cs35l01: +6 db default gain
– cs35l03: +12 db default gain
pop and click suppression
cs35l01和cs35l03主要应用：
mobile phones
laptops/netbooks
portable navigation devices
active speakers
portable gaming
图1。cs35l01和cs35l03方框图
图2。cs35l01和cs35l03 sd和fsd模式典型连接框图
图3。cs35l01和cs35l03 hd和fhd模式典型连接框图
note:3. the value of the capacitance connected to the lfilt+ net should not exceed 4.7 f. presence of a capacitance above 4.7 f will prevent proper hd and fhd operation
1 x 1.7 w cs35l01 放大器参考设计套件
the crd35l01 demonstrates the cs35l01 high-efficiency hybrid class-d audio amplifier. this reference design implements a single-channel amplifier that delivers 1.7 w per full-bridge channel into 8-ohm loads using a single +5-v supply.
differential audio inputs can easily be connected through the j1 header. if desired, the gain can be adjusted through the optional input resistors.
the -sd, -fsd, -hd, or -fhd suffix designates the cs35l01’s operational mode. each of the four boards is configured to operate in each of the four corresponding modes of the cs35l01 device.
device shutdown control is available through the j2 header.
1 x 1.7 w cs35l01 放大器参考设计主要特性：
four boards provided in the cs35l01 amplifier reference design kit
separate boards for each mode configuration
– sd, fsd, hd, and fhd
cs35l01 produces a default +6-db gain
delivers 1.4 w/ch into 8ohm at 1% thd+n
delivers 1.7 w/ch into 8ohm at 10% thd+n
differential mono analog inputs
demonstrates recommended 4-layer layout and grounding arrangements
– optional output filter connections
– optional gain adjustment resistors
powered by a single 2.5- to 5.5-v power supply
device shutdown control
图4。1 x 1.7 w cs35l01 放大器参考设计框图
图5。crd35l01-sd电路图
图6。crd35l01-fsd电路图
图7。crd35l01-hd电路图
图8。crd35l01-fhd电路图
材料清单（bom）：
